• SPB Pneumatic Tri-eccentric High Performance Butterfly Valve
  • SGC Bushing and Port Guiding Perforated Plug Type Control Valve
  • SELN Electronic Double Seat Control valve
  • SEZL Electronic Sleeve Control Valve
  • SZFF Pneumatic Tank Bottom Valve
  • SZEL Electric Single Seat Control Valve
  • SPW Three Way Electric Control Valve
  • SPO Pneumatic Through-Way Ball Valve
  • SCN Perforated Plug Low Noise Type Control Valve
  • SBP Pressure Balanced Cage and Port Guiding Parabolic Plug Type Control Valve
  • V230X  Self-operated/regulating Differential Pressure Control Valve
  • SPV Pneumatic V-notch Ball Control Valve
  • SPFO Pneumatic Teflon-lined Ball Valve
  • SPTO/SPLO Pneumatic 3-way Ball Valve
  • SERB Electric lining rubber butterfly valves
  • SELO/SETO electric O-type 3-way ball valve
  • SEFO Electric o-type fluorine-butterfly ball valve
  • SEFB Electric fluorine-butterfly valves
  • SEB Electric Triple eccentric butterfly valve
  • SECO Electric ceramics o-type ball valve

SANZHOU PRODUCTS

SERB Electric lining rubber butterfly valves

SERB Electric lining rubber butterfly valves

SERB Electric lining rubber butterfly valves

Information

      SERB Electric lining rubber butterfly valves,component by 3601R series angle travel electronic electric actuators and valve body.Body cavity corrosion rubber lining, simple structure, easy operation, long service life and light weight。
     Can be widely used in chemical, pharmaceutical, food, paper and water treatment industries, etc. For switching and adjusting control of all kinds of efficient and reliable gas, liquid and solid powder size and medium .

Valve Body
Type: two pieces Direct cast ball valve, Concrete structures please see figure 1(DN50~300) and figure 2 (DN350~600)
Nominal Size: DN40、50、65、80、100、125、150、200、250、300、350、400、450、500、600、700、800、900、1000
Nominal Pressure: GB PN 1.0、1.6MPa
                            ANSI 150
End Connection: No flange type(Wafer type)
                        Flange GB PN1.0、 1.6Mpa according to HG20596-97M;
                       ANSI CLASS150 according to ANSI B16.5 RF及HG/T20615-97
 Flange distance:Wafer type according to GB/T12221-1989,EN558.1:1995,ISO5752-1982 basic series 20
                            Flange  according to EN558.2:1995 and ISO5752-1982 basic series 14
Body Material:ZCuAl10Fe3、QT450-10 Nickel plated、WCB、ZG0Cr18Ni9、ZG0Cr18Ni12Mo2Ti
Bonnet Type:same with body
Packing: PTFE V-type
Packing Gland :Bolts pressure type
Oil paint: Carbon steel shell surface required to paint, shell made of stainless steel and copper no painting .

Trim
Disc: type: linetype
Flow characteristics: approximate percentage, please refer to FIG 4 and table 2
Disc material:QT450-10 Nickel plated、ZcuAl10Fe3、ZG0Cr18Ni9、ZG0Cr18Ni12Mo2Ti
Stem material:  2Cr13 piece.modified、17-4PH Precipitation hardening processing、0Cr18Ni9、0Cr17Ni12Mo2
Seat material: Please refer to table 1
Rated travel:Full open 90°

Actuator
Type: 3601R series angle travel electronic electric actuators,
         Concrete structures please see figure 3
Power: Single phaseAC220V±10% 50HZ,Three phase AC380V±10% 50HZ(If need three phase power, please mark out.)
Power consumption: A type 50VA,B type 150VA,C type220VA
Control signal:DC4~20mA,DC1~5V(Long distance avoid DC1~5V)
Output  signal:DC4~20mA,DC1~5V(Load resistance below 500Ω)
Function forms:Changes Positive and negative effects by switch
MAX rotor angle:90°
Adjust scope:0±25%,rotor angle 20%~100%
Environmental temperature: Ordinary without space heaters -10℃~+60℃,Space heaters -35℃~+60℃,Flameproo -10℃~+60℃
Relative humidity: Ordinary under 95,Flameproof 45% ~ 85%
Protection level: IP65
Class of explosive-proof: Exd II BT4
Overload protection: A type and B type will be optional,C type should be matched

Tag:rubber butterfly valves butterfly valve rubber valve Electric butterfly valve [HOME]

CONTACT US

SHANGHAI SANZHOU AUTOMATION DASH CO.,LTD
ADD:No.2651, Waiqingsong Road, Baihe Town Qingpu District, Shanghai, 201709, P.R.C.
TEL:86-21-59748861
FAX:86-21-59747999
Website:www.szvalves.com
E-mail:info@szvp.cn