• SPB Pneumatic Tri-eccentric High Performance Butterfly Valve
  • SGC Bushing and Port Guiding Perforated Plug Type Control Valve
  • SELN Electronic Double Seat Control valve
  • SEZL Electronic Sleeve Control Valve
  • SZFF Pneumatic Tank Bottom Valve
  • SZEL Electric Single Seat Control Valve
  • SPW Three Way Electric Control Valve
  • SPO Pneumatic Through-Way Ball Valve
  • SCN Perforated Plug Low Noise Type Control Valve
  • SBP Pressure Balanced Cage and Port Guiding Parabolic Plug Type Control Valve
  • V230X  Self-operated/regulating Differential Pressure Control Valve
  • SPV Pneumatic V-notch Ball Control Valve
  • SPFO Pneumatic Teflon-lined Ball Valve
  • SPTO/SPLO Pneumatic 3-way Ball Valve
  • SERB Electric lining rubber butterfly valves
  • SELO/SETO electric O-type 3-way ball valve
  • SEFO Electric o-type fluorine-butterfly ball valve
  • SEFB Electric fluorine-butterfly valves
  • SEB Electric Triple eccentric butterfly valve
  • SECO Electric ceramics o-type ball valve


SEFB Electric fluorine-butterfly valves

SEFB Electric fluorine-butterfly valves

SEFB Electric fluorine-butterfly valves


   SEFB Electric fluorine-butterfly valves,component by 3601R series angle travel electronic electric actuators and valve body.
Cavity of valve body and plate are lined with plastic injection molding adopt high corrosion resistance, ageing fluorinated YiBing ene, corrosion resistance and reliable sealing.
This series of pneumatic fluorine-butterfly butterfly valve is mainly used in chemical medicine, food processing industries papermaking water for such strong corrosive medium ph of regulation or cut off.

Type :wo pieces Direct cast ball valve, Concrete structures please see figure 1(DN50~300) and figure 2 (DN350~600)
Nominal Size : DN50、65、80、100、125、150、200、250、300、350、400、450、500、600
Nominal Pressure:GB PN 1.0、1.6MPa
                             ANSI 150
End Connection: No flange type(Wafer type)
Flange distance:according to GB/T12221-1989 EN558:1995及ISO5752-1982
Body Material:please refer to table1
Bonnet Type:same with body
Packing: PTFE V-type
Packing Gland :Bolts pressure type
Oil paint: Carbon steel shell surface required to paint, shell made of stainless steel and copper no painting .

Disc: type: linetype
Flow characteristics: approximate percentage, please refer to FIG 4 and table 3
Disc material:please refer to table 1
Stem material: please refer to table 2
Rated travel:Full open 90°

Type: 3601R series angle travel electronic electric actuators,
         Concrete structures please see figure 3
Power: Single phaseAC220V±10% 50HZ,Three phase AC380V±10% 50HZ(If need three phase power, please mark out.)
Power consumption: A type 50VA,B type 150VA,C type220VA
Control signal:DC4~20mA,DC1~5V(Long distance avoid DC1~5V)
Output  signal:DC4~20mA,DC1~5V(Load resistance below 500Ω)
Function forms:Changes Positive and negative effects by switch
MAX rotor angle:90°
Adjust scope:0±25%,rotor angle 20%~100%
Environmental temperature: Ordinary without space heaters -10℃~+60℃,Space heaters -35℃~+60℃,Flameproo -10℃~+60℃
Relative humidity: Ordinary under 95,Flameproof 45% ~ 85%
Protection level: IP65
Class of explosive-proof: Exd II BT4
Overload protection: A type and B type will be optional,C type should be matched

Tag:fluorine-butterfly valve Electric butterfly valve butterfly valve valve Electric butterfly valve [HOME]


ADD:No.2651, Waiqingsong Road, Baihe Town Qingpu District, Shanghai, 201709, P.R.C.