• SPB Pneumatic Tri-eccentric High Performance Butterfly Valve
  • SGC Bushing and Port Guiding Perforated Plug Type Control Valve
  • SELN Electronic Double Seat Control valve
  • SEZL Electronic Sleeve Control Valve
  • SZFF Pneumatic Tank Bottom Valve
  • SZEL Electric Single Seat Control Valve
  • SPW Three Way Electric Control Valve
  • SPO Pneumatic Through-Way Ball Valve
  • SCN Perforated Plug Low Noise Type Control Valve
  • SBP Pressure Balanced Cage and Port Guiding Parabolic Plug Type Control Valve
  • V230X  Self-operated/regulating Differential Pressure Control Valve
  • SPV Pneumatic V-notch Ball Control Valve
  • SPFO Pneumatic Teflon-lined Ball Valve
  • SPTO/SPLO Pneumatic 3-way Ball Valve
  • SERB Electric lining rubber butterfly valves
  • SELO/SETO electric O-type 3-way ball valve
  • SEFO Electric o-type fluorine-butterfly ball valve
  • SEFB Electric fluorine-butterfly valves
  • SEB Electric Triple eccentric butterfly valve
  • SECO Electric ceramics o-type ball valve

SANZHOU PRODUCTS

HGC High Pressure Perforated Plug Type Control Valve

HGC High Pressure Perforated Plug Type Control Valve

HGC High Pressure Perforated Plug Type Control Valve

Information

Large capacity high pressure globe valve body , thick wall bonnet, Metal-seated quick-changeable trim combination .HGC ensures safety and credibility in >100Kg/cm2 high pressure conditions. Double guided by bushing and port , working trims are of dynamic stability. Perforated cylinder Plug can effectively protect sealing surface of seat from being damaged by high speed flow scoured.

HGC series is especially suitable for the high pressure fluid with large pressure drop and possibility of cavitation.
 
    Standard Specification
Valve Body
Type: Cast globe Valve
Nominal Size: DN25, 32, 40, 50, 65, 80, 100, 150, 200,
Nominal Pressure: ANSI 600, 900, 1500
DIN PN63, 100, 160, 250
JIS 63K
GB PN6.3, 10.0, 16.0 MPa
End Connection: Flange ANSI B16.5 RF, RTJ
DIN2543/2544/2545 RF
JISB2201 RF
JB/T81 RF
JB/T82.2 FM
Weld: ANSI B16.5 SW(DN≤80); BW(DN>80)
Face to Face Dimension:
ANSI(IEC60534-3-1 and ASME B16.10)
DIN PN 63, 100, 160 (DIN3202-F2)
DIN PN250 (DIN3202-F3)
GB PN6.3, 10.0, 16.0 MPa ISO12221 2 Series(ISO5752 2 Series)
Please refer to table 6.1~6.2
Body Material:Please refer to table1 Please refer to figure 3 for Operated Temp. &Pressure Range
Bonnet Type:STD type……-46℃~300℃
Radiation fin type……300℃~530℃
(Please pay attention to the different Temp. &Pressure Range of material)
Packing Material: graphite compound packing、graphite packing,
Operating Temp. &Pressure range is shownn in table 2,figure2
Seal Gasket:Spiral wound gasket(PTFE+316、Flexible Graphite+316),
Graphite with metal gasket(Graphite+316、Graphite+304)
 
Valve Trim
Plug Type:Perforated cylinder plug
Flow Characteristic:EQ%、Linearity (Please refer to figure4)
Trim Material:Please refer to table 3 for STD material assembly,operated Temp. &Pressure Range
 
Actuator
Type:Multi-spring diaphragm
Air Supply:Max. 6bar
Ambient Temp.:-20℃~+80℃
Spring range:As shown in Table 5.1~5.2
Air Connection:G1/8(SA1);G1/4(SA2);G3/4(SA3)
STD Specification:As shown in Table 5.1~5.2
 
Accessory
Positioner,Filter-regulator valve,Solenoid valve,Limit switch,
Valve position Transmitter,Booster relay,Lock-valve,Handwheel,etc.
 
Action
Air to open,Air to close

Tag:High Pressure Control Valve Perforated valve High Pressure regulate valve globe egulate valve [HOME]

CONTACT US

SHANGHAI SANZHOU AUTOMATION DASH CO.,LTD
ADD:No.2651, Waiqingsong Road, Baihe Town Qingpu District, Shanghai, 201709, P.R.C.
TEL:86-21-59748861
FAX:86-21-59747999
Website:www.szvalves.com
E-mail:info@szvp.cn